News
The latest chemistry news, including important research advances, business and policy trends, chemical safety practices, career guidance, and more.
Read More
Materials scientists are on the hunt for an adhesive that binds strongly to diverse surfaces and can be easily removed and reused. Conventional polymers like epoxies achieve high strength through rigid, cross-linked networks, but they are brittle and prone to sudden, catastrophic failure under stress. Conversely, adhesives used in tapes offer ductility but lack the strength for heavy-duty bonding.
Small-molecule glues utilize noncovalent bonds for adhesion, allowing the glues to be removed easily and to leave pristine surfaces behind. But they too lack tough adhesion, which is achieved when a material has both high ductility and high adhesive strength.
Now researchers have
developed a small-molecule glue
that not only bonds strongly to nonstick surfaces but is easily removed with ethanol (
J. Am. Chem. Soc.
2026, DOI:
10.1021/jacs.6c07886). “It combines adhesive strength and ductility together with easy washability, which is needed for recycling the adhesive as well as reusing the adhered objects,”
Takuzo Aida
, a polymer chemist at the University of Tokyo, says in an email.
The white crystalline adhesive, synthesized by Aida’s team, is a fluoro-crown ether phosphate called
Cyclic
FP-fmoc. To test its adhesive strength, researchers first glued two untreated polytetrafluoroethylene (PTFE) plates by sandwiching molten
Cyclic
FP-fmoc between them and letting it cool at room temperature for 10 min. The plates, glued to each other by a tiny contact patch of just 7 cm
2
, were able to hoist an 8 kg weight and registered a staggering 1.3 ± 0.1 MPa on lap-shear tensile tests, eclipsing the 0.1–0.7 MPa limits of commercial epoxies, acrylics, and silicones.
Cyclic
FP-fmoc binds to Teflon via strong, interfacial fluorine-fluorine (F–F) interactions, solid-state NMR spectroscopy confirmed. Meanwhile, the glue molecules hold on to each other inside the adhesive layer via hydrogen bonding between urethane units and π-π stacking of the fluorenyl rings.
Remarkably, a simple ethanol wash completely stripped
Cyclic
FP-fmoc from the target PTFE plates, leaving no trace behind. The recovered adhesive proved repeatedly reusable, reliably maintaining its adhesive strength of ~1.2 ± 0.1 MPa across multiple cycles.
Two metal dumbbell-shaped weights hang by a hook from a white strip of material. The white strip is made of two pieces that overlap in the center.
Two polytetrafluoroethylene plates joined with a new glue, called
Cyclic
FP-fmoc, are able to lift 8 kg of weight.
Credit:
Kohei Kikkawa
“Since ethanol is the main component of hand sanitizer, we believe it is possible to de-bond and recycle the adhesive by using hand sanitizer as a substitute in certain real-world situations,” Aida says. He explains that due to the noncovalent bonds, recycling the adhesive simply involves a breaking of those bonds, yielding the original monomer, which can be reused with no loss of adhesive strength. “In general, this can’t be achieved by using polymer adhesives,” he adds.
Mechanical engineer
Alban Sauret
and bioengineer
Phillip Messersmith
, who were not involved in the study, both stress that it is imperative to study this molecule’s environmental fate and impact before pressing it into service.
Sauret, at the University of Maryland, found the adhesive’s combination of strength, ductility, and ethanol removability “quite unusual.” “The removable and recyclable nature of the adhesive is promising, as we would reuse fluoropolymer parts instead of discarding them,” he says. He finds it likely to be a member of the family of per- and polyfluoroalkyl substances (PFAS) based on its fluorinated structure, “but whether it behaves like a problematic ‘forever chemical’ is a separate question.”
Messersmith, at the University of California, Berkeley, notes that existing polymer adhesives “complicate recycling efforts . . . by making it hard or impossible to separate materials in a recycling stream.” If this new adhesive is not an environmentally harmful compound, he says, “the approach could allow for easy separation and recycling of adhesively bonded materials in the future.”
Send the reporter feedback
Submit a Letter to the Editor for publication
https://doi.org/10.47287/cen.534850.newsarticle
Chemical & Engineering News
ISSN
0009-2347
Copyright ©
2026 American Chemical Society
Enjoyed the article?
Share
This glue bonds to nonstick surfaces and wipes clean with ethanol
The environmental impact of the fluorinated molecule should be studied, outside experts say
cen.acs.org
ADVERTISEMENT
